Home > Product > EP50 Electro permanent magnetic chuck
 

Description :

1.Comprising 50mm*50mm poles with a force of 15-17kgf / cm2.

2. It is possible to predetermine the force generated by counting the number of poles,

work piece gripping at least 4 pole contact faces.

3.Controller do the Magnetizing or demagnetizing in 5 seconds.

4.Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests


Use:

1.Used for normal and heavy duty drilling, milling, and CNC machining center

2.Best used for the  workpieces at least 250*250 mm and 10 mm thick.used for small, medium dimensions with normal operating air gaps and thinner workpieces.


Standard Features and Benefits:

 1Flexibility :

Allow single set-up machining with 5-sided accessibility

workpieces larger than the table  are machinable

 2Safety

No electric power supply during clamping.

Constant and uniform magnetic power over entire area.

No temperature rise in operation. so no impact on precision and work piece deformation due to temperature rise.Can used for long time.

 3Efficient

Easy and quick position,reduce set-up time and increase available machine time.

High accuracies and tolerances

 4Cost-effectiveness

no maintenance

no machine modifications 

reduced tool consumption

 Specs:

Other size on request

Aplication:



Home | About us | Products | News & article | Quality | Applications | Contact us
Copyright 2013 XiQingFang Lifting Magnets All Rights Reserved.